Download PDF 
Bookmark page 
Print page 
Next product
TWO SPEED
drill motors
- Allows for a wide range of speeds to be achieved when used in conjunction with variable flow power units
- Changes between high/low speed can be achieved by pushing or pulling the manual actuator on the motor
- Unit can be mounted onto an XE50 water swivel, as shown, allowing fitment to most proprietary drill stands
- Motor supplied complete with quick release hose couplings and on/off control valve
- Product Details
- Technical Details
- Sizes
The Xcalibre range of hydraulically driven two speed drill motors is available in 4 different sizes, so you can select the model best suited to your particular application.
| Input Oil Flow: | 20-40 l/min (5.3-10.6 US gal/min) |
| EHTMA Category: | C, D and E |
| Weight: | 23 kg (50.7 lb) (without hoses and drill bit) |
| Sizes (Part No) | rpm @ 20l/min (5.3 US gal/min) |
rpm @ 30l/min (7.9 US gal/min) |
rpm @ 40l/min (10.6 US gal/min |
| 2WSMV4040 (High / Low): | 500 / 250 | 750 / 375 | 1000 / 500 |
| 2WSMV4050 (High / Low)*: | 400 / 200 | 600 / 300 | 800 / 400 |
| 2WSMV4065 (High / Low): | 300 / 150 | 450 / 225 | 600 / 300 |
| 2WSMV4080 (High / Low): | 250 / 125 | 375 / 188 | 500 / 250 |
* Standard on two speed Neptune coring trailer