Download PDF 
Bookmark page 
Print page 
Previous product
kit
- Fixing free core drill stand.
- Ideal for use in towns, cities or any restricted access area.
- A single operator can handle all aspects of drilling.
- Product Details
- Technical Details
- Accessories
Eliminating the need to bolt down, the SIMPLEX stand-on drill stand can drill from Ø12mm to Ø162mm (400mm deep) vertical holes in asphalt and concrete. The drill stand is ideal for use in towns and cities, and is designed to be transported in the back of a compact van.
The handle and wheels, make transportation to and from the van easy and achievable even for a single operator. When the SIMPLEX is in position and ready to core then there is no need for bolting the drill stand down, instead the operator uses his own weight to keep the drill stand in place.
Together with our low voltage submersible water pump, powered from our Electra 6HP petrol power pack, a single operator can handle all areas of a drilling job.
Simplex stand on drill
| Drill Attachment: | Quick release hinged drill mounting, for rapid change of drill motor |
| Drill capacity: | Ø162mm (6.4”) maximum drill diameter / 450mm (17.7”) core bit |
| Drill mast: | Fixed mast for vertical drilling only |
| Drill travel: | Up to 450mm (17.7”) |
| Dimensions (LxWxH): | 450mm (17.7”) x1250mm (49.2”) x 1070mm (42.1”) |
| Weight: | 27 kg (59.5 lb) - Excluding hydraulic motor & hoses |
Electra 6 power pack
| Hydraulics output: | 20 l/min @ 90 bar (5.3 US gal/min @ 1300psi) (Filtration:25 Micron) |
| Hydraulic reservoir: | 6.2 l capacity (1.6 US gal) |
| Cooling System: | 12V DC electric fan-cooled. |
| Prime mover: | Kohler 4.5 kW (6 hp) Petrol engine |
| Auxiliary Output: | 12V DC (Max 4A) |
| Dimensions (LxWxH): | 700mm (28”) x 400mm (16”) x 470mm (18”) |
| Weight: | 45 kg (99.2 lb) / Dry: 40 kg (88 lb) |
Submersible Pump
| Power: |
12V DC (Max 2.5A) |
| Outputs: | 12.7 l/min @ 0.75 bar (2.8 US gal/min @ 11 psi) |
| Water reservoir: | 25 l (1.6 US gal) |
Drill Motor: Mini Single Speed
| Max. power output: | 3 kW (4 hp) |
| Input Oil Flow: | 20 l/min (5.3 US gal/min) |
| EHTMA Category: | C |
| Max. back pressure | 14 bar (200 psi) (measured at core drill) |
| Oil working temperature: | 30-70°C (86-158°F) |
| Noise* (EN/ISO 15744): | <70 dB (1 m LPA dB re 20 μPa) |
| Vibration* (EN/ISO8662-5): | <2.5 m/s2 |
| Weight: | 6.5 kg (14.3 lb) (without hoses and drill bit) |
Simplex Mini Drill Models
| Models | rpm @ 20l/min (5.3 US gal/min) |
Suitable Asphalt drill bit range | Suitable Concrete drill bit range |
| WSMV2082 | 2400 rpm | Ø12-45mm (0.5-1.75”) |
Ø12-25mm (0.5-1.0”) |
| WSMV2129 | 1500 rpm | Ø45-90mm (1.75-3.5”) |
Ø25-50mm (1.0-2.0”) |
| WSMV2199 | 1000 rpm | Ø90-127mm (3.5-5.0”) |
Ø40-70mm (1.6-2.75”) |
| WSMV2316 | 600 rpm | Ø127-162mm (5.0-6.4”) |
Ø70-127mm (2.75-5.0”) |
* Xcalibre Equipment Ltd cannot be held liable for the consequences of using the declared values, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which we have no control.